Call-outs Mon–Sun 8am–5pm, evening call-outs 6pm–8pm.

Repair guide

Washing machine not draining? 6 checks before you call an engineer

Short answer: most washing machines that will not drain have a blocked pump filter or drain hose. Clean the filter, check the hose for kinks and run a rinse-and-spin. If the water still will not pump out, the drain pump has probably failed and needs an engineer.

1. Switch off and make it safe

Turn the machine off at the wall and keep towels ready – there may be several litres of water in the drum.

2. Clean the pump filter

The filter is usually behind a small flap at the bottom front. Unscrew it slowly over a shallow tray. Coins, hair grips and fluff are the most common culprits.

3. Check the drain hose

Pull the machine out and make sure the grey drain hose is not kinked, crushed or blocked where it joins the sink trap or standpipe.

4. Check the sink trap or standpipe

If the hose connects under the sink, a blocked U-bend or a new dishwasher/sink connection with the blanking cap still fitted can stop drainage.

5. Try a rinse and spin

Select a rinse-and-spin or drain programme. Listen for a humming pump – humming without draining often means a blockage or a failing pump.

6. Look for error codes

Many machines show a drain error code (for example E21, F18 or 5C depending on the brand). Note it down – it helps our engineer bring the right part.

When to call an engineer

  • The pump is silent or buzzing but not emptying.
  • The machine trips the electrics.
  • It leaks from underneath.
  • It drains but will not spin.

YS Appliances repairs washing machines across Banbury, Oxford and Oxfordshire. You can see your call-out price and book a slot online in under two minutes.

XSS test xbad

Appliance playing up? Let's get it fixed.

See your call-out price instantly and pick a slot that suits you – same-day visits available.

Call Book a repair